Measure the form

Whether roundness, levelness, concentricity, coaxiality, run-out, axial run out, perpendicularity, cylindricity, parallelism or straightness. ACCRETECH offers high-precision solutions with easy operation for each profile measurement task. Many ACCRETECH profile measuring devices are therefore real multi-purpose tools, which can measure several profile parameters in one device or work step, require little space and save valuable time. The principle “Function follows Form” applies, and not the other way round.

matrix background-en

Presicion

Weight of workpeace
Diameter of workpeace

(0.04 + 6H/10000)μm
bis (0.01 + 4H/10000)μm; 0.05μm/100mm

Concentricity

Rondcom Nex

Rondcom Nex

  • rotation accuracy: (0,02 + 3,2H/10000) µm
  • accuracy in z-axis: 0,10µm/100mm
Rondcom Touch

Rondcom Touch

  • rotation accuracy: (0,04 + 6H/10000) µm

Rondcom 43

Rondcom 47
  • rotation accuracy: (0,02 + 6H/10000) µm
  • accuracy in z-axis: 0,25µm/100mm
Rondcom 31

Rondcom 31

  • rotation accuracy: (0,04 + 6H/10000) µm
Rondcom 41

Rondcom 41

  • rotation accuracy: (0,04 + 6H/10000) µm
  • accuracy in z-axis: 0,5µm/100mm

Rondcom 55

Rondcom 55
  • rotation accuracy: (0,02 + 6H/10000) µm
  • accuracy in z-axis: 0,9µm/200mm
Rondcom 60
Rondcom 60
  • rotation accuracy: (0,02 + 6H/10000) µm
  • accuracy in z-axis: 0.1μm/100mm
Rondcom 65

Rondcom 65

  • rotation accuracy: (0,01 + 4H/10000) µm
  • accuracy in z-axis: 0.1μm/100mm

Rondcom 73

Rondcom 73
  • rotation accuracy: 0.06μm
  • accuracy in z-axis: 0.9μm/200mm

Rondcom 76

Rondcom 76
  • rotation accuracy: (0,04 + 3H/10000) µm
  • accuracy in z-axis: (0x2+8x2/1000)x
    (1+S/1000)

Rondcom Grande

Rondcom Grande

Evenness

Parallelism

Perpendicularity

Cylindricity

Koncentricity / Parallelism

Straightness

Roundness

formen-messen kreisMeasure roundness

Accretech - Industrielle Messtechnick - Formen messen - Rundheit

The perimeter of each cross section must be between 2 concentric circles with a distance of 0.05 mm.

formen-messen parallelogrammMeasure evenness

Accretech - Industrielle Messtechnick - Formen messen - Ebenenheit

The surface between 2 parallel levels must have a distance of t = 0.05 mm.

formen-messen doppelkreisMeasure concentricity

Accretech - Industrielle Messtechnick - Formen messen -Konzentrizität

The centre of the inner circle must, in each cross section, be inside the circular tolerance area over the length of the cylinder, whose centre is concentric to the centre of the outer circle and has a diameter of t = 0.05 mm.

formen-messen doppelkreisMeasure coaxiality

Accretech - Industrielle Messtechnick - Formen messen - Koaxialtität

The actual axis of the tolerated cylinder must have a diameter of t = 0.05 mm, formed as a coaxial cylinder to reference axis A.

formen-messen pfeilMeasure roundness

Accretech - Industrielle Messtechnick - Formen messen - Rundlauf

The perimeter of each cross section which is perpendicular to reference axis A-B must be in between two concentric circles located in the same cross section, which have a radial distance of t = 0.05 mm.

formen-messen pfeilMeasure axial run out

Accretech - Industrielle Messtechnick - Formen messen - Planlauf

The profile line in each diameter between two levels which are perpendicular and parallel to the reference axis must have a distance of t = 0.05 mm.

formen-messen rechter winkelMeasure perpendicularity

Accretech - Industrielle Messtechnick - Formen messen - Rechtwinklig_2

Axis as a reference. The diameter (t) is bounded by 2 parallel levels which bound the measured surface. Levels perpendicular to the reference axis.

formen-messen rechter zylinderMeasure cylindricity

Accretech - Industrielle Messtechnick - Formen messen - Zylindrizität

The recorded lateral surface of the cylinder must be between two coaxial cylinders which have a radial distance of t = 0.05 mm.

formen-messen parallelMeasure parallelism

Accretech - Industrielle Messtechnick - Formen messen - Parallel_2

The tolerance area in the measurement level (axial section) is bounded by two straight lines parallel to the reference from the distance (t), to measure parallelism of two straight lines. Diametrical surface line as a reference element.

formen-messen geradeMeasure straightness

Accretech - Industrielle Messtechnick - Formen messen - Geradheit

The surface line of the cylinder must be within two straight with a distance of t = 0.05 mm.

This Website uses Cookies more information...

Die Cookie-Einstellungen auf dieser Website sind auf "Cookies zulassen" eingestellt, um das beste Surferlebnis zu ermöglichen. Wenn du diese Website ohne Änderung der Cookie-Einstellungen verwendest oder auf "Akzeptieren" klickst, erklärst du sich damit einverstanden.

Schließen